The saga continues...

I've been watching Chris Murphy's lynda.com 'Color Management Essential Training' videos, which are very good but i'm still not sure I'm doing this properly. Here's the story:

He outlines a test to determine whether your LCD display's backlight is controlled via the Brightness or Contrast on-screen control: fill a new Photoshop file with black, and adjust each control independently to determine which shows a visible change in the solid black. After resetting my monitor to defaults, and trying this, it was obvious that the Contrast control was linked to the backlight.

Murphy then demonstrates profiling, using the same Eye-One Match software. He skips the 'Set the Contrast' portion in the software, as that relies on adjusting the Contrast control to adjust backlight. I did do it, because my monitor backlight does appear to be controlled by Contrast.

Next is the 'Set the White Point' portion, which involves adjusting RGB values separately. Chris says it's not a good idea for non-high-end LCDs -- that it's better for white point adjustment to occur in the video card LUT. So he skips that portion, and -- although my monitor does allow such independent adjustment -- i skip it as well.

Then it's 'Set the Luminance', where we use the Brightness control. In Chris' case he's adjusting the backlight. In my case, uh, I dunno what I'm adjusting exactly. Anyway, I can't get the current marker all the way down to the target value. With Brightness at 0, it's slightly above my target 90. (I wonder if this means my monitor is burning out, or it's an indicator I should have done the RBG adjustment stage?) But Chris encourages staying slightly above the target so there's a little room to come down later. I settle at 92.6.

Then calibration, correction curve, RGB->XYZ, and a display profile is born!

I learned from Chris that Eye-One Match includes a Monitor Validator feature. I do it and find my DE2000 is 2.56! Seems quite high. (Chris' was 0.78.) Does it mean my monitor just sucks, or is it an acceptable value, or is there something I need to adjust?

In other news, blinds are more closed (except for one window -- this room has lots of 'em), room is darker, I shall start wearing black.

Thanks for any perspective on any of this.